This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1745107314 | 39 Count | 53 Count | 32 Count | 0 VDC | 0 VDC |
| 1745106413 | 33 Count | 44 Count | 27 Count | 0 VDC | 0 VDC |
| 1745105512 | 29 Count | 40 Count | 24 Count | 0 VDC | 0 VDC |
| 1745104612 | 23 Count | 32 Count | 19 Count | 0 VDC | 0 VDC |
| 1745103711 | 19 Count | 27 Count | 16 Count | 0 VDC | 0 VDC |
| 1745102810 | 14 Count | 19 Count | 12 Count | 0 VDC | 0 VDC |
| 1745101909 | 10 Count | 15 Count | 9 Count | 0 VDC | 0 VDC |
| 1745101008 | 3 Count | 5 Count | 3 Count | 0 VDC | 0 VDC |
| 1745100107 | 648 Count | 1008 Count | 505 Count | 0 VDC | 0 VDC |
| 1745099206 | 642 Count | 996 Count | 500 Count | 0 VDC | 0 VDC |
| 1745098305 | 636 Count | 987 Count | 495 Count | 0 VDC | 0 VDC |
| 1745097404 | 631 Count | 979 Count | 491 Count | 0 VDC | 0 VDC |
| 1745096503 | 628 Count | 974 Count | 489 Count | 0 VDC | 0 VDC |
| 1745095602 | 622 Count | 963 Count | 484 Count | 0 VDC | 0 VDC |
| 1745094702 | 616 Count | 956 Count | 479 Count | 0 VDC | 0 VDC |
| 1745093801 | 610 Count | 947 Count | 474 Count | 0 VDC | 0 VDC |
| 1745092900 | 605 Count | 941 Count | 470 Count | 0 VDC | 0 VDC |
| 1745091999 | 598 Count | 931 Count | 464 Count | 0 VDC | 0 VDC |
| 1745091098 | 594 Count | 925 Count | 461 Count | 0 VDC | 0 VDC |
| 1745090197 | 587 Count | 915 Count | 455 Count | 0 VDC | 0 VDC |
| 1745089296 | 583 Count | 910 Count | 452 Count | 0 VDC | 0 VDC |
| 1745088395 | 576 Count | 900 Count | 446 Count | 0 VDC | 0 VDC |
| 1745087494 | 570 Count | 893 Count | 441 Count | 0 VDC | 0 VDC |
| 1745086593 | 563 Count | 883 Count | 435 Count | 0 VDC | 0 VDC |
| 1745085692 | 557 Count | 876 Count | 430 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)